Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Tornevall Networks RaspTunnel is an experimental project where we're adding micro servers into a DMZ-controlled environment. The tunnel project primary target is ipv6 tunnels, where they are normally not reachable, or has a very weak configuration.

As of august 2016, the bandwidth are limited to 100/100.

How does it work?

An installer injects required data into a raspberry pi, which is configured with a static ip address matching the network that needs it. It should be installed at the same ip range as your DHCP server and your incoming gateway shoud be configured with a DMZ-pointer to this machine.

With Tornevall Networks API, the pi will download data required for a controller to connect to the service, since the gateway should (unless the user have full control by themselves) be able to administered from an external point (Tornevall Networks IP-ranges). The API will also be used to configure dynamic tunnels.

As this is based on Linux (Raspian for pi 1, and Ubuntu 16 for pi 2 and pi 3), not only ipv6 tunnels may be considered. However, if there is ipv4 included here, we should make sure that the primary gateway are really routing networks properly. A recommended path for ipv4 tunnels should be somewhere at

This is a infrastructure issue, so the primary location of the ongoing project issue is located at  INFRA-15 - Getting issue details... STATUS

  • No labels